View Single Post
JimCulp JimCulp is offline
Registered User
 
Join Date: Jan 2006
Posts: 274
Sorry Jakester- I don't know, but I would try the usual suspects like Pelican.

cl8ton- Yes 315's on the rear- no wheelies yet.

equality- The rears don't rub, but I do have 800 lb coil overs in the rear.

Rory- Thanks- I believe the wheels were around $2,400 I don't remember the tire cost, but they're BFG T/A KD's.

wcc- My wheels are 9's and 11's with 255/40/17's and 315/35/17's. I didn't need any bodywork for these to fit properly. I did have Mike give me a 1/2 inch deeper dish than standard which makes you have 1/2 inch of extra wheel stud that requires cutting. I also had the wheels done with future Big Red fitment in mind. I've heard that the 930's rear wheel arch extensions were done by had at the factory and that they are all slightly different, so YMMV as far as rubbing/having to roll fenders goes.

Last edited by JimCulp; 04-05-2008 at 02:53 AM..
Old 04-05-2008, 02:49 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #109 (permalink)