View Single Post
Barracuda Barracuda is offline
Registered User
Join Date: Dec 2007
Posts: 26
I lift my 911 on my lift all the time from just the standard lift is a picture where to lift it from..I do actually tie the front down to the lift arms afetr I first raise it as a precaution b/c it's so heavy in the back....not sure if needed but I take that extra step personally.Also, I have to place the rear pads under the car...then push it back to get the front arms under then i set it up on the proper areas. Also, if you are lowered you may neesd to use a floorjack under the front of the car to h\give it a very slight lift in order to move the pads under the car. I have a Bend-Pak and no issues byt my buddy has another lift with higher lift pads and we had to do it w/ the floorjack.
91' 964 Turbo.. Andial goodies and Nice exhaust
69' Superbee (Old School)
70' 440-6 Pack Cuda ( Not finished yet))
03' Z06 Vette

Last edited by Barracuda; 04-06-2008 at 06:38 AM.. Reason: .
Old 04-06-2008, 06:34 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)