View Single Post
onboost onboost is offline
Registered User
 
onboost's Avatar
 
Join Date: Mar 2006
Location: Metro DC
Posts: 5,365
Quote:
Originally Posted by Barracuda View Post
I lift my 911 on my lift all the time from just the standard lift pads...here is a picture where to lift it from..I do actually tie the front down to the lift arms afetr I first raise it as a precaution b/c it's so heavy in the back....not sure if needed but I take that extra step personally.Also, I have to place the rear pads under the car...then push it back to get the front arms under then i set it up on the proper areas. Also, if you are lowered you may neesd to use a floorjack under the front of the car to h\give it a very slight lift in order to move the pads under the car. I have a Bend-Pak and no issues byt my buddy has another lift with higher lift pads and we had to do it w/ the floorjack.

Barracuda's got you covered with his diagram!

Paul
__________________
RGruppe #180
So many cars.. so little time!!
Old 04-06-2008, 12:08 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)