Thread: wanted axle
View Single Post
1topcat 1topcat is offline
'89 930
 
1topcat's Avatar
 
Join Date: Dec 2007
Location: Ft Myers, FL
Posts: 452
Steve,

I do not know if they are off a 930. These actually came off my GT40 which was set up with a G50/01 transmission and cv joints on each side of the half axles. Basically, the same set-up as a 930. I also have a '89 930 but I do not know if they work on a '78. I am still amazed that you snapped one. Another measurement is the length of the spline area parrallel to the axle. This is 1 and 1/4 inches long. If you can determine they are a fit, just let me know and paypal me some postage and they are yours.

If the fitment is not a match and if you can't find them on Pelican, then try here
http://www.dansperformanceparts.com/buggy/trans/buggytran1.htm You can get just the axle without the CV's there. /Tony
Old 04-19-2008, 12:09 AM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)