View Single Post
BoxxerSix BoxxerSix is offline
Registered User
 
BoxxerSix's Avatar
 
Join Date: Jun 2006
Location: Ballston Spa, NY
Posts: 528
if it's broken off it's a done deal and the turbo has to come out to drill the broken stud out the right way.

There's a chance that you're just turning the stud and backing it out of the housing rather than spinning the nut off the stud itself. Just keep working it back and forth a little at a time, keeping it soaked in penetrating spray and with any luck it'll drop out w/o breaking. If you have a torch(even a propane one) heat the housing near the stud for a bit and it'll help in removing the stud.
__________________
Adam Hennessy
Old 04-19-2008, 04:22 PM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)