View Single Post
gumba gumba is offline
Registered User
 
gumba's Avatar
 
Join Date: Dec 2001
Posts: 3,752
930 front calipers are a direct bolt-on. The rears need to be machined for the different bolt spacing, not a big deal. Vehicle Craft in N.J. & Rennsport in Oregon both sell complete kits as well as machine the rear calipers. You'll probably use a couple of washers to center the calipers over the disks. I heard the floating rotors are noisier than non-floating but you should confirm it. You could use a 23 mm m.c. if you don't want to go to a boosted m.c..
You might compare a 1 pc. 9x17 fuchs to a 9x16 for the weight difference. The only problem with the 16's are tire availability.
79 930/DP935
75 Carrera RS look race car
Old 05-08-2008, 08:44 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)