Thread: a/c removal
View Single Post
sand_man sand_man is online now
"I wuz the liquor..."
 
sand_man's Avatar
 
Join Date: Oct 2005
Location: Cooterville, Cackalacky
Posts: 6,487
Here's a link to the light I bought:
http://www.danielsternlighting.com/products/products.html
It's the model 37 Hella Third Brake Lamp:



Once the light was stuck in place, I tucked the wires along side the window rubber down to the lower corner (driver side) of the rear window. There is a grommit there that I think the rear defrost wires go through. That hole goes into the engine compartment and there i just used the same wires that the cyclops was using. You might need to remove the rear speaker panel.

When you remove the Cyclops there are three holes: two smaller ones and a larger one in the middle. I found some plugs at Ace hardware and just painted them to match the body.

Last edited by sand_man; 05-09-2008 at 08:02 AM..
Old 05-09-2008, 07:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)