View Single Post
wcc wcc is offline
Registered User
wcc's Avatar
Join Date: Aug 2005
Location: Michigan
Posts: 3,334
I think so. With the help of this board and maybe a hand to help out you should be fine. Don't be scared to post up questions.

Also, do some thread searching. There's stuff already out there. Also, search the 911 tech forum because there is good (930) stuff there as well.

Here's a couple that came to my mind:
GHL Headers w/heat install question

GHL Headers and K27 install questions

FWIW, I don't think I'd use an impact gun on the headers. Also, I used lots of Kroil to soak and then MAPP gas to get off all the barrel nuts. A couple nuts stripped and I welded a blob of weld on the end of the long wrench and sharpened it and pounded it up the barrel nut. Heated it really hot, I mean when you think it's hot it's not make that sucker GLOW. I used a nut splitter on the three regular nuts on the PS and a swivel socket for the DS.

But again, these people on this board were VERY helpful to me. I don't know if I would have tackled it without them. Well, I probably would but they made it a ton easier.
Old 05-13-2008, 12:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)