View Single Post
GJF GJF is offline
Slantnose from HELL
GJF's Avatar
Join Date: Dec 2004
Posts: 809
I have the COP solution for our cars. I already had Hargett make valve covers to mount and hold the COPs. Accel DFI makes an ignition controller that can do ANY configuration 12 plug, wasted spark, coil near plug. What ever you want, it can do it.

NGK BKR8EIX Iriduims 5/8 hex (5/8 is nice when you have twin plug, gives a little more room)
NGK B8EGV 13/16 hex
NGK B8EVX Platinums 13/16 hex

As Goran stated these would probably be your best choice. Unless you are over 1.4 the 8's are fine.

And pay attention to what rsrmike stated "ONLY CHAMPION RACING PLUGS" your local parts house will more than likely NOT have these in stock.
87 911 Carrera platform
Twin Garrett's, Big Valve, Xtreme Cylinder Heads, JB Racing cylinders and machine work, custom JE pistons, GT2 EVO cams, GT3 oil pump, modified 3.2L intake, 80mm TB, custom Intercooler, equal length headers, DFI, KEP Stage 2 custom twin disc, G50 custom gear set, LSD, Tilton trans pump, Fluidyne cooler
Old 05-26-2008, 02:20 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)