View Single Post
BoxxerSix BoxxerSix is offline
Registered User
BoxxerSix's Avatar
Join Date: Jun 2006
Location: Ballston Spa, NY
Posts: 528
It is worth the money to do so if you have a good set of headers to start with. B&B's have a good tendancy to crack alot, ofthen inside the heat exhanger boxes if you have a heat-option set there. I'd inspect the weld areas for cracks and risers before sending them off to be coated. Any problems you'd want to attend to before the ceramic goes on as it goes inside and outside.

Jethot make a nice, effective, and cheap coating option that's very easy to maintain(clean). Swaintech's coating is the best as far as performance and thermal retention goes but get's dirty easily and is a pain to keep clean. Most give ait a light coat of some kind of high temp spray paint to make it easier to keep clean as the coating itself is very rough(gritty) Jethots coating is smooth.
Adam Hennessy
Old 05-28-2008, 11:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)