View Single Post
930cabrioboy 930cabrioboy is offline
Registered User
 
Join Date: May 2008
Location: Montreal, Canada
Posts: 20
thanks for the input Alan, there is no gap at the ait plate. That screw you speak of at the rhs ..could it be gummed up and cause some of mt grief? the one I pointed at was as clean as new when I removed it.
The description of prising open was the plate where all the hard lines come from above the banjo that I pointed at? If so I took it part earlier and cleaned it out...seemed clean and since then I have flow up to the injectors...but not enough to spray through injectors.

I keep pluggn'
Old 05-30-2008, 05:38 PM
  Pelican Parts Technical Article Directory    Reply With Quote #28 (permalink)