View Single Post
sand_man sand_man is online now
"I am the liquor..."
 
sand_man's Avatar
 
Join Date: Oct 2005
Location: Cooterville, Carolina
Posts: 6,000
A basic list:
-965 (964 C2 Turbo) intercooler
-965 CIS induction hose/elbow
-965 style turbo to intercooler boost pipe, or make your own
-compressor by-pass valve - lots of options here. I'm using a Hyperboost valve, but Forge makes a good one, and some prefer to run the plastic Bosch unit. Also known as a diverter valve and a blow-off valve.
-brackets to hold it all in place.
-you will also need a pipe to connect the CIS induction hose to the turbo charger intake pipe. When you remove the large factory BOV housing, the piece of pipe that normaly does this job gets automatically removed as it's part of the housing.

you can use this link as a starting point for the CIS induction elbow and the by-pass valve
http://www.eagleday.com/rawagaexpi.html
__________________
-jeff
back in the saddle: '95 993 - just another black C2
*SOLD*: '87 930 GP White - heroin would have been a cheaper addiction...
"Ladies and Gentlemen, from Boston Massachusetts, we are Morphine, at your service..." - Mark Sandman (RIP)

Last edited by sand_man; 06-09-2008 at 08:14 AM..
Old 06-09-2008, 06:31 AM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)