View Single Post
aws aws is offline
Registered User
Join Date: Feb 2008
Location: Phoenix Arizona
Posts: 156
The early 2.0 mag case can not be cut for the 90mm cylinders reliably. The early case does not always have enough material on the # 3 cylinder at the flywheel end of the case and may break thru when bored for the larger cylinders. The other problems may be piston to valve clearance if the pistons are for CIS injection and lower compression ratio caused by the short stroke crank.

Old 06-14-2008, 09:22 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)