View Single Post
Alan L Alan L is offline
Registered User
Alan L's Avatar
Join Date: Apr 2006
Location: New Zealand
Posts: 3,248
My distributor is not the standard one apparently - I only have one line going into it - vacuum from the throttle body. From an earlier discussion when I was working my way thru the car, I believe it is from an earlier model 930, and has a more aggressive curve?
The turbo is one bit I have not pulled apart - but it 'seemed' OK. Grabbing the spindle I could get no end float or axial play that I could feel - is this a useful indication?
When I floor it off the line, it really is slow to pick up revs - I suspect you could run past it until the turbo kicks in - then you are quickly looking for second, and trying to see over the front of the car.
It is shooting flames out the back on over- run into braking zone - is this indicative of anything?
Old 06-16-2008, 11:49 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)