View Single Post
equality72521 equality72521 is offline
sudo apt-get purge 930
 
equality72521's Avatar
 
Join Date: Jul 2006
Location: Brandon, FL
Posts: 4,840
Quote:
Originally Posted by RarlyL8 View Post
I always work from the turbo out. Bolt the turbo to the stock bracket using 4 short 10mm bolts, then mount the J-pipe to the turbo and heat exchanger crossover pipe. Leave it all loose and wiggle it around then tighten it all up moving back and forth from the turbo to the crossover pipe. You may have to apply some pressure.
As a last resort you might have to loosten the exchangers as well. The J-pipe does not bend easy but the entire assembly will warp with heat over time.
Thanks Brian. This pipe can bend as much as an inch? Is it harmful to put that much torque on the turbo body while trying to bring the J-pipe back into shape?
__________________
Mark 1979 930 Euro ***GONE AND DON'T MISS IT AT ALL***

"Worrying about depreciation on your car and keeping mileage down is like not ****ing your girlfriend so her next boyfriend finds her more appealing"
--clutch-monkey
Old 06-21-2008, 08:17 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)