View Single Post
petri petri is offline
Registered User
petri's Avatar
Join Date: Feb 2007
Location: Finland
Posts: 348
I had a strong heating problem in track days in my Green one (also street legal), even if no problem at all when at street.
Now there is no problem with the following installation;
2 x Setrab 265 x 265 +
1 x Setrab 700 x 200
Note, since the photo has taken, the oil lines has changed douple that wide (interior measure of the line always more than 18mm, the bigger the better) to make sure that oil pump doesn't cavitate and get broken.
The final system is very satisfying . No heating problems whatsoever hard I push .

In my 3,6 natural aspirated "RSR" I have similar front cooler than you have in slant nose pics, and that car runs all the time in the track just slightly below the red line. That particular car will get next winter 2 x 964-coolers to corners as an addition to act together with the center cooler to make sure I wouldn't blow the engine or kill the oil (Valvoline Racing VR-1 10-60) too fast.

Garage: Strosek 911 RUF BTR|Strosek 911 3.6 rat RSR|Strosek 928SR|928S4R|928S|996C2RSR...and more... Altogether 11 Germans - 3 Italians - 2 British

Last edited by petri; 06-22-2008 at 10:33 PM..
Old 06-22-2008, 10:31 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)