View Single Post
Compulsive Compulsive is offline
Registered User
 
Join Date: Jul 2008
Posts: 69
Quote:
Originally Posted by 930gt-40r View Post
I would certainly drill for twin plug even if you are not going to use it immediatly. A pair of 964 cams will be cool. I would try to see if you could get a set of Pauter rods, the stock 930 get weak in the face of big power. If you do not plan on going over 400- leave the rods and just stick the arp fasteners in. Nathan has a point about the 98mm pistons/fully finned cyls. I would use the Mahle stuff for road use, they are good. Other things to do: Shuffle pin the case, valve springs/retainers, and I am sure there are others that i will remember later.
I will stay with the stock rods. 964 cams are going in. 6500rpm will be my limit.

What does it mean to shuffle pin the case? Why?

So you vote for Mahle above others? Do you mean the 7.5:1 CR 3.4L set? Damn they are expensive

Are Jerry Woods bearings the best or does it really matter?
Old 07-18-2008, 07:56 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)