View Single Post
356-930 356-930 is offline
Acceleration Junkie
 
Join Date: Aug 2007
Location: Laguna Beach, CA
Posts: 263
Garage
Quote:
Originally Posted by e p slick View Post
Turn on starter circuit and engine comes to life but then quits once initial fuel squirt is used up. Unfortunately I have most likely turned mixture adjuster screw out of its proper range.Curious to know if there is a baseline number per fuel system benchtop set-up in order to keep engine running so I can adjust AF + idle and get back to a starting point. Appreciate any response. EPS
If the engine fires/runs briefly, then shuts down, likely too lean. Fuel to fire initially is likely being supplied by the 7th injector and not the fuel head.
Don't know about benchtop set-up. Try turning enrichment screw 1/2 turn clockwise (remember, Right is Rich, Left is Lean), see if the engine will fire/run. Repeat till engine will stay lit so you can fine tune.
Old 07-20-2008, 08:43 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)