View Single Post
HMeeder HMeeder is offline
Registered User
 
HMeeder's Avatar
 
Join Date: Sep 2000
Location: San Diego, CA, USA
Posts: 619
Garage
Porsche Crest

Jay;

There are 3 ways to adjust the door. By loosening the 5mm allen screws that hold the triangle piece near the back part of the door you can adust the 'up-down' of that back part. Loosening the 3 allen screws at the motor you can adjust the front 'up-down' and once you do that you will need to adjust the flap stop or the door will wiggle when it is in the up position.

Depending on what you want to do, adjust as you see necessary. Be careful though, because once you adjust one of them, you will probably have to adjust one of the other things. It can be a royal PITA to get it 'just right.'

Good Luck (it may just drive you nuts once you get into it!)
__________________
Herb
'72 Tangerine 'Teen
2.4 liter aluminum handgrenade
Old 03-12-2002, 07:24 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)