Thread: type 930/64
View Single Post
nocarrier nocarrier is offline
Registered User
Join Date: Mar 2008
Posts: 947
So here is an update on my 930/64 type engine.

While hunting down some air leaks I found that all 6 of my injector blocks were cracked. I ordered a new set from our host and decided to minor refurbish of the cis system and bov assembly.

After getting the new injector blocks I found that there were extremly smaller than the ones that I removed from the car. It appeared the old ones were bored out to just over 36mm. Measuring the intake revealed the same dimension.

The ports on my cylinder heads measured to 37mm!!

Old 07-28-2008, 10:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)