View Single Post
voitureltd voitureltd is offline
Join Date: Feb 2008
Location: Bayside Wi
Posts: 2,863
I used to have this problem on a 930 with a Andial intercooler. The stock pipe is modified to fit the intercooler and uses a blue intercooler high pressure hose that is clamped to the original solid pipe. Put in a new seal between the pipe to intercooler. Then drill and tap a hole in the pipe for the installation of a set screw. Under high boost the pipe can move down and the red o ring seal can bulge out ( usually in the back where you can't easily see the bulge )and create a pressure loss.
Old 08-17-2008, 06:41 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #26 (permalink)