View Single Post
rsrmike rsrmike is offline
Registered User
 
rsrmike's Avatar
 
Join Date: Jan 2008
Location: Birmingham, AL
Posts: 538
Hello, you are on the right track w/ innovate products. You cannot use that oxygen sensor port for a wide band sensor as it is before the turbo.

The old style "narrow band" sensors worked different from the new "wide band". The wide band cannot be exposed to the heat and pressure in the exhaust before the turbo. It will be innacurate and quickly destroyed if placed there.

You need to install a bung in the exhaust some where close to 3-4 inches AFTER the turbine outlet.

I can't give you much advice on your WUR but I would recommend investing in a fuel pressure gauge to monitor control pressure, as well as an ambient thermometer(for cold start notes), and a log book to make notes on all you adjustments, and resulting AFR changes.

Good luck!
__________________
Professional Overcomplicator
Old 09-14-2008, 04:55 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)