View Single Post
fredmeister fredmeister is offline
Smart quod bastardus
fredmeister's Avatar
Join Date: Oct 2002
Location: Baltimore, MD, USA
Posts: 2,229
How accurate did you measure everything?
You need to use calipers to measure the inner diameter and spring wire diameter.
The spring length is from flat to flat that is machined on each end of the spring.
The only variable that I measured possibly inaccurate because of the scale I used would be spring rate. I did not use a calibrated scale....but probably close enuff.
I did not use an actual weight and measure compression change.....but sounds like you are closer to 1.0 bar than 0.8.
Won;t know for sure until you compare to my other numbers as from my previous post above.
1979 930 Turbo....3.4L, 7.5to1 comp, SC cams, B&B intercooler, Snow Perf water/meth injection, Rarlyl8 headers, Garret GTX turbo, 36mm ported intakes, Innovate Auxbox/LM-1, custom Manually Adjustable wastegate housing (0.8-1.1bar),--running 0.7bar max
---"When you're racing it's life! Anything else either before or after, is just waiting"
Old 09-24-2008, 01:08 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)