View Single Post
DonE DonE is offline
Wo ist die Rennstrecke?
 
DonE's Avatar
 
Join Date: Mar 2004
Location: Brooks, GA
Posts: 1,211
By turning the ignition to "on", this will energize the WUR. It is independent of anything else. If you do not have power, you'll need to trace the wires back. Remember, look for the simplest solution first - blown fuse, broken wire at connector (at the WUR - this is where mine broke), poor connection at the 14 pin connector (could be old and falling apart too), engine ground loose, etc. Most likely, its not in the wiring harness.
Old 09-27-2008, 04:13 PM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)