View Single Post
j_hurricane_y j_hurricane_y is offline
I'll have another
j_hurricane_y's Avatar
Join Date: Sep 2006
Location: NoVA
Posts: 180
You 'da "Mann" RB.
If you have goo in the trans. chamber where the slave goes then replace the slave cylinder, trans. shaft seal and the push rod felt. It does not matter weather the goo is trans. fluid, clutch fluid or water, you need to replace all the pieces.
Exactly my plan; happy to have confirmation my t'inking is correct.

Since the clutch fluid is under pressure, when you pull the clutch lever, and the trans. fluid is not, except thermal expansion, I do not see how trans. fluid can make its way to the master cylinder.
Indeed! I clearly have nothing more to offer in way of explaination, but inquiring minds want to know!

Your stand is mo' better than mine; mine could defintely use some bigger feet for stability. Will have to swing by Ho' Depot at some point.

Thanks greatly for the seal install link. That's exactly what I've been searching for and the next step in making this thread comprehensive. I love this forum.
"I love twins!"
Old 10-04-2008, 11:33 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #39 (permalink)