View Single Post
A930Rocket A930Rocket is offline
A930Rocket's Avatar
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 7,420
Sliders, synchros, dogteeth (1-4) and a gasket set run about $2k. For my track car, 3rd and th are the gears I use the most and thats what wears out. That's the basics and from there you need to look at the bearings, etc.

My trans had been rebuilt and about 1 1/2 years later I needed to rebuild it again from lots of track use. I opted to just replace the above components and it worked fine.

There's a write up here on Pelican. There was another thread here on the 930 forum talking about it. If you take your time you can do it.

930 transmission overhaul
Old 10-13-2008, 11:33 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)