View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
 
RarlyL8's Avatar
 
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,255
Garage
Are you not wanting to replace the system currently damaged?

Ben, I made up one of those driver's side exit zorks about a year ago using all our components minus the muffler. We talked about it if you recall. You sent me a length of pipe that I used to replace the muffler. Problem was cost. The replacement of the muffler with a length of pipe only reduced the cost by about $150 so when the smoke cleared I had to get $500 for it. I had doubts that we could sell very many at that price.

We can make one for you no problem.
My "hooligan" exhaust is very similar but uses an expansion chamber in place of the muffler. Basically no sound deadening material. It is wicked sounding but not deafening like a zork.
LOTS of options and configurations.
__________________
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 10-15-2008, 11:22 AM
  Pelican Parts Technical Article Directory    Reply With Quote #21 (permalink)