View Single Post
GJF GJF is offline
Slantnose from HELL
 
GJF's Avatar
 
Join Date: Dec 2004
Posts: 831
The casting wasn't ready when my heads were done but I was in the shop when he was on the prototype. This is the answer to any air cooled engine. So say a 910 or some early 2 liter heads are hard to find in good condition. No problem Bill has there castings made to where he can custom CNC any engine port configuration and any bolt spacing. Plus place the port at the location desired. basically there is no limitations. He had the heads beefed up where they need it so even on the big motors no more welding the fins to prevent cracking.

__________________
It changes from time to time.....
Old 11-08-2008, 05:27 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #56 (permalink)