View Single Post
sand_man sand_man is offline
resident samsquamch
sand_man's Avatar
Join Date: Oct 2005
Location: Cooterville, Cackalacky
Posts: 6,815
Originally Posted by RarlyL8 View Post

If you wish to remove the bumper as one unit you must first remove the heat shiled to get to the nuts that remove the bumper boobs that must be removed to get to the nuts that hold the bumper on.
Be careful when removing the accordians on each side as the little bolts can scratch your paint.
The four nuts for the bumper are not under the boobs. They are under the rub strips on each side. If you look closely at the rub strip, you will find a small plastic plug. Carefully pry the plug out. Under the plug there is phillips screw. Loosen the screw. The end of the rub strip is actually just tucked into the boob (LOL). Just pull it out and you'll see the nuts. You don't have to remove the boobs! Rarly is correct about using caution when working with the accordions.
back in the saddle: '95 993 - just another black C2
*SOLD*: '87 930 GP White - heroin would have been a cheaper addiction...
"Ladies and Gentlemen, from Boston Massachusetts, we are Morphine, at your service..." - Mark Sandman (RIP)
Old 12-11-2008, 07:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #21 (permalink)