View Single Post
h20cooled7 h20cooled7 is offline
930s rule the wasteland
h20cooled7's Avatar
Join Date: Dec 2006
Location: Spotsylvania ,Virginia
Posts: 1,213
Send a message via AIM to h20cooled7
Question car is depressing me!

80 930 Car starts fine,idles fine. Engage 1st gear let out clutch start going then I will get a hesitation from 2k up until 2800 then it will run awesome the rest of the rpm range. I have not fooled with the mixture adjustment,and cannot find any vacum leaks.Heres what I have done. Had Brian Leask rebuild my WUR and this has more than doubled my fuel milage. Removed all injectors and checked spray pattern w/ bosch special tool and spray pattern look good with no pissing. R/R all spark plugs with recommended 15$ a pop plugs, and have Clewett wires that have also been done. Adjusted valves to spec cold. I checked CID for 12 volts and ground even swapped out with permatune unit and runs the same way. ohmed out coil ,primary w/in spec but 2ndary was about 750 ohms about 100 ohms out of spec.Has anybody had a similar issue or throw me in a new direction? This is really starting to piss me off!
1980 930 Turbo
1993 Corrado
1983 944
1984 944
2001 VW golf TDI
Old 12-20-2008, 03:07 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)