View Single Post
stup stup is offline
Registered User
 
Join Date: Sep 2006
Location: scotland
Posts: 248
I recently purchased a carrera 3.2 with a bad missfire and it turned out to be inlet manifold gaskets...
This could be your problem however as advised above i would try and re-torque first and maybe test for leaks at each one before you go ahead and strip down!!
Link below is for 3.2 carrera engine.. Similar set up in the 930 apart from the injectors are located also in the blocks.
I believe they can crack,,not so sure they would warp though.

1988 3.2 carrera engine bad missfire,HELP!!
__________________
SP Autobahn www.spautobahn.co.uk
Porsche inspector for Peter Morgan UK
http://www.porscheinspections.com/
"92" 964 turbo,Modified and recently rebuilt using all ARP hardware..
Purpose built fuel controller set up to acheive perfect fuel curve on CIS inj.

Last edited by stup; 12-21-2008 at 06:53 AM..
Old 12-21-2008, 06:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)