View Single Post
x98boardwell x98boardwell is offline
After the next project
 
x98boardwell's Avatar
 
Join Date: Sep 2006
Location: Central Valley, CA
Posts: 1,517
Garage
Thanks

Guys,

Well, I will have SC cams, rebuilt cylinder heads (no modifications), K27s from UMW, new ring set and honed cylinders which were in spec when checked for out of roundness... so it's a top end rebuild. Other than that, the car is stock, oh and an B6 IC. And just to clarify all of my rockers were re-ground, shafts checked to ensure they were in spec (I had to replace 5 of them) and then micro-polished and I have new injectors, rebuilt fuel distributor and aluminum injector blocks from Turbo Kraft.

So, I'm guessing a lot less than 400 horses at the wheels.

I had no issues at all before and the only thing that I have done is resurface the pressure plate which they said looked pretty good before they started.

Looks like I might just stick with my stock set up and just buy a new clutch disc just to be safe even though mine looks good. I included some pics for input..

Thanks,
Bryan










Old 12-22-2008, 08:51 PM
  Pelican Parts Technical Article Directory    Reply With Quote #5 (permalink)