View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
 
RarlyL8's Avatar
 
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,930
Garage
Yes the twins are turbo exhaust only. The waste gate has a stubby dump pipe aimed under the engine.

Yes Eric after over a year I finally got back to this design and finished it. Everything looks simple but never is. So many angles to consider for the perfect fit and look. You will notice the tailpipe is 2 piece. That is due to rotational angle needed to offset any irregularity in the angle of the 180 bend off the muffler. That bend is adjustable via the spacer seen attached to the muffler body. You can move the location of the tailpipe up or down and rotate the twins to line up horizontle with the bumper. This setup can tuck up under the bumper or rotated downward to come out below the stock valance.

Yes I sell uncut fiberglass valances or will custom cut as well.

__________________
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8

Last edited by RarlyL8; 02-01-2009 at 02:43 PM..
Old 02-01-2009, 02:38 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)