View Single Post
waynesco1 waynesco1 is offline
MEMBER # 930
 
waynesco1's Avatar
 
Join Date: Dec 2007
Location: Olympia Wa
Posts: 347
3.3 crankcase main bearing bore 65mm.
3.0 crankcase main bearing bore 62 mm.

3.3 Crankshaft has two counterweights per crankpin.

3.0 The oil supply groove (bearing No. 8)
3.3 Oil supply is in the bearing journal .

3.0 Crankshaft , stroke 70.4 . mm. Main Journals - Bearing No. 1-7 57 mm. Bearing No. 8 31mm
3.3 " " 74.4. mm. " " - " " 1-7 60 mm. " " 8 40mm

3.0 Con-rod Journals 52 mm. Shoulder to flywheel oil seal 65.0 mm.
3.3 " " " 55 mm. " " " " " 90.0 mm.

3.0 Connecting rods A- dimension 127.8 mm
3.3 " " A - " 127.0 mm

3.0 Flywheel Mounting 6 bolts washers on bolts 44 mm whole circle diameter
3.3 " " 9 bolts no washers on bolts 70 mm " " "

3.0 Oil pressure pump gears width 43 mm
3.3 " " " " " " 51mm 19% increase in capacity

3.0 Scavenge pump gears width 58 mm Alum Housing
3.3 " " " " 80mm. Housing change to cast iron increase of 38%

3.0 Cylinder head washers under the cylinder head nuts 22 mm.
3.3 " " " " " " " " 24 mm.

3.3 Distributor rotates anticlockwise

3.3 Pressure plate 30 mm thicker
__________________
MEMBER # 930

Last edited by waynesco1; 02-05-2009 at 05:09 AM..
Old 02-04-2009, 06:03 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)