View Single Post
billjam billjam is offline
Certified User
billjam's Avatar
Join Date: Aug 2007
Location: Perth, Western Australia
Posts: 2,003
Originally Posted by mb911 View Post
what do I need to make a scavange pump work on sc cams. I have no airpump as this is a sc based engine. here is the thread the references this
This link is to a thread that covered your situation (if you are trying to fit the scavenge pump without the air pump drive).
I recently did exactly this when I deleted the air pump and drive from my 930 motor and installed SC cams at the same time.
The only thing to watch is that the pump shaft is not too long. If it is too long, it will hit against the rear of the camshaft when you bolt it to the camshaft housing. I had to grind about 1mm from the end of the shaft to give about 0.5mm clearance.

Oil pump drive required on SC camshaft

1988 Carrera - 3.6 engine (with ITBs, COPs, MS3X) and a whole set of turbo body panels waiting in the attic.
Day job ...
Memories: '68 912, '72 911T, '80 911SC, '84 911, '85 930, '86 930, '87 911
Old 02-05-2009, 09:33 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)