Thread: Nonstarting 930
View Single Post
Phil Gilsdorf Phil Gilsdorf is offline
Registered User
 
Join Date: Apr 2003
Posts: 122
Ok I finally got around to installing the rebuilt dizzy, new wires, and new plugs. I left the original BOSCH CDI and Coil on for a test. Engine does not start or fire any cylinders, but one weird thing is the tach reads 4500rpm when cranking.

With the Permatune CDI I finally got it to fire! but it still won't start. Tach does not move from baseline. I crank it, a few cylinders fire, and then nothing.

Other pertinent info:
-I am getting spark at all cylinders
-I tested the overboost sensor by grounding out the brown wire which did not change anything.
-With the green metering safety switch disconnected all the pumps come on but it does not change anything.
Old 02-08-2009, 11:22 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #38 (permalink)