View Single Post
jomama jomama is offline
Registered User
 
Join Date: Jan 2008
Location: san leandro
Posts: 53
at first the clutch pedal was real stiff so i changed the cable then the pedal bar snaped re welded week later snaped again.dropped motor replaced clutch bearing and backing plate replaced motor the clutch was real bad pulled motor found a crack in the fork causing the throw out bearing to bind on the pilot tube.the crack was hard to find due to the grease with a closer look at it there was rust half way in the crack so it was like that for a long time.hope this save's some one a lot of frustration.
Old 02-11-2009, 04:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #21 (permalink)