Thread: CV joint help!
View Single Post
jly535 jly535 is offline
Blitzkrieg
 
jly535's Avatar
 
Join Date: Jan 2008
Location: Spokane
Posts: 361
Quote:
Originally Posted by zcoker View Post
Make sure you use the original spring washers behind the center "star" on the shaft else you are going to have too much play and the clip could get knocked off. I had the same problem with the larger boot area, not being about to get a clamp on there. The boot fit very tightly, so I left the clamp off and all has been well. There's a rib there, so it holds the boot on extremely tight. I used off-road boots because they last longer and can take severe punishment. Many have had their new factory-like boots ripped after only a few miles. I don't know what's up with that, probably cheap stuff. You can polish the inside of the channels and clean things up. Worked for me. Mine feel like brand new. Use new bolts and schnoor washers from Macmaster-Carr.

Thanks! I guess I'll do a little polishing today.
Old 02-14-2009, 11:16 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)