View Single Post
Benny771 Benny771 is offline
89 930.
 
Benny771's Avatar
 
Join Date: Jul 2008
Location: Canada Ontario
Posts: 783
Garage
Angry What is with MOMO?

I purchased a wheel MOMO (Competition), MOMO Hub L231, 1/2 inch spacer also MOMO, for my car.

Quality of the spacer and the hub are very concerning. The spacer was not flat therefore making the wheel sit uneven on it? The Hub, one of the 6 mounting holes was out approx. 1/32 making the bolt impossible to install.

I wanted the trim ring on the wheel but the bolts that came with the wheel, spacer and the Hub were too short?
After phoning MOMO about this issue they told me that they knew the bolts were not long enough and to purchase my own m5 x 40's. Very cheap MOMO.

There were no instructions (that were understandable) on there site or box to install the spacer.
Questions arose about the ground ring as seen here: http://www.momocanada.com/momo/techtips_steeringwheels.html
The ring actually goes the other way (upside-down)when you use a spacer.
The US site is the same.
My 1hr install turned into 3 days.

What a mess!
I guess quality did not follow the wheels that i have installed, years ago.
Shame MOMO, shame.

My 2 cents worth.
Anyone else?
Old 02-17-2009, 05:07 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)