View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,289
I installed one of these system one 75 micron oil filters with push on #6 AN fittings in the approximately 10" long section of rubber hose between the oil tank and scavenge pump. The filter is around 2" diameter and 4.5" long.
It fit perfectly in that area next to the other oil lines and lower valve cover, and works great filtering the oil from the turbo before it goes into the oil tank.

I have picture of it but after looking can't find it. If I take another I'll edit it into this post.

Here's a pic from the website, it's toward the bottom of the page. I ordered it from system one and it was around $90with shipping, and the 2 barbed push-on swivel AN fittings were around $4 each and they allow you to unscrew the filter assembly to clean the filter element after loosening the fittings.
I used hoseclamps on the 2 fittings.
Old 02-22-2009, 09:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #21 (permalink)