View Single Post
spuggy spuggy is offline
Registered User
 
Join Date: Jul 2003
Location: Glorious Pac NW
Posts: 2,834
Quote:
Originally Posted by Ringmaster View Post
As part of my EFI upgrade I am installing a Bosch Motosport 044 rear fuel pump. The pump's inlet requires a Male M18x1.5 fitting and the Female fuel feed fitting from the chassis is an M16x1.5. Does anyone know where to source a Male to Male M18x1.5 to M16x1.5 fitting (steel or aluminum)? The fitting would look something like this:



What fuel fitting or hose configuration are other 044 owners using?
I bought one from Ebay when I was in the UK and supplied it with the pump, but the wrenches didn't like it and sourced their own to adapt to the factory fuel line IIRC.

Pretty much a standard, off-the-shelf fitting in Europe.

Failing that, you could knock one up out of hex bar stock in about 20 minutes with a lathe with a screwcutting attachment...
__________________
'77 S with '78 930 power and a few other things.
Old 02-22-2009, 11:10 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)