View Single Post
cole930 cole930 is offline
Registered User
 
Join Date: Mar 2000
Location: Auburn,In. U.S.A.
Posts: 2,449
stup,


[QUOTE][SIMPLE BOLT ON REQUIRES NO MODIFICATIONS.YOU WILL NEED A FEELER GAUGE FOR SETTING THE PLATE HEIGHT.
/QUOTE]

I had always been under the impression you simply removed the bolt
holding the plate in place sit the venturi plate on top and reattached the
center bolt. You do need the feeler gauge to recenter the original metering
plate before you tighten it down. Mine came with it's own sensor plate as
well as the venturi plate and bolt. Then after reading Keith's post I thought I
had better check. The guy I talk to is the guy who used them and had
them made.

Cole
__________________
Cole - 80 930 "The Old Sled"
Mods: TurboKraft Custom IC, 934 Headers, GSX 61, Zork, Port Work, SC Cams, Air Mod Fuel Dist Relocated, Water Meth Injection, BL WUR, MSD 6530, Greddy EBC, Synapse Bov, Short 2nd & 3rd with 8:37 R&P, Wevo Shifter, Coupling, and Mounts, MTX-L SSI-4, Big Brakes, Rebel Coilovers, Bilstein Sports.
Old 03-09-2009, 12:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #110 (permalink)