View Single Post
stup stup is offline
Registered User
 
Join Date: Sep 2006
Location: scotland
Posts: 248
Meter head flow adjustment question??

All this talk recently about metering heads on a few recent threads got me wanting to check mine for even flow to each cylinder!

I have checked mine first of all by just testing straight from the pipe fittings themselves "WITHOUT" the injector on,,,i turned over car for nearly 30 seconds with the meter plate fully open and results follow...
I have 4 cylinders within 3 percent and 1 cylinder 10 percent out and the other approx 13 percent out.
I believe there is an adjustment screw under the screw head next to each outlet on the meter head,, Can anyone tell me...do you turn each clockwise to increase flow or anti-clockwise??...Just wanted to make sure before i adjust then re-test.

Once i get them all within 2-3 percent i will then test again with my new fuel injectors on!..

__________________
SP Autobahn www.spautobahn.co.uk
Porsche inspector for Peter Morgan UK
http://www.porscheinspections.com/
"92" 964 turbo,Modified and recently rebuilt using all ARP hardware..
Purpose built fuel controller set up to acheive perfect fuel curve on CIS inj.
Old 03-09-2009, 02:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)