View Single Post
JMA-RUF JMA-RUF is offline
Twins are more fun!
 
JMA-RUF's Avatar
 
Join Date: Dec 2005
Posts: 639
Quote:
Originally Posted by Chris84Cab View Post
I have done a lot of searching on the forum regarding information on adding a turbo set up on my Carrera. It has been extremely helpful.

I will most likely move forward with a system through Ben at M & K, as well as a Protomotive Chip.

Are there any issues in running a typical 930 type system on a Euro Spec 10:3:1 compression motor? I know boost can be an issue.

Do you think the valve guides will survive?

My goal is 80 to 100 added horsepower.

Thanks in advance.
Contact Protomotive. They have a CHIP specifically tuned for the Euro spec motor, but you need to run a little less boost than 0.5bar if you are thinking of the non-intercooled version. At 0.5bar, you should be at around 360HP, so at a guess, at 0.4bar you'd be at around 340HP?

If you want to run more boost, you're in trouble. You'll need to decompress that motor for any more boost, but at 0.4 - 0.45bar boost, you'll reach your 80-100HP goal
__________________
James
Carrera TT

(3.3, Protomotive MAP ECU, EFI, GT2 EVO CAMs, Twin Plugged, Twin Turbo's)

Last edited by JMA-RUF; 03-12-2009 at 10:41 PM..
Old 03-12-2009, 10:25 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)