Thread: CIS to MFI
View Single Post
h20cooled7 h20cooled7 is offline
930s rule the wasteland
 
h20cooled7's Avatar
 
Join Date: Dec 2006
Location: Spotsylvania ,Virginia
Posts: 1,213
Send a message via AIM to h20cooled7
I was just taking the return line from the WUR to the distributor and blew out to make sure it wasnt clogged. I noticed fine water droplets on the end of the banjo fitting. As I stated before I started having this problem after refueling. How can I be sure I have water in the fuel? I just had the fuel level sender out and didnt see any debris in the tank or anything unusual in the tank.If water is present will this raise my cold and warm pressures? and can I use a fuel system drier or a BG product to clear this up without having to disassemble my whole fuel system? What components will water damage if left to fester to long?
__________________
1980 930 Turbo
1993 Corrado
1983 944
1984 944
2001 VW golf TDI
Old 03-14-2009, 03:16 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)