View Single Post
BARknucklehead BARknucklehead is offline
Corrupted by power
 
Join Date: May 2009
Posts: 55
Quote:
Originally Posted by beepbeep View Post
How are you going to solve water mantle cooling? A short cooler loop with electrical pump? I wouldn't run it without water.
One better - one of these driving off of the passenger side cam housing:

Will use a rear fender well mounted radiator or heat exchanger.

Quote:
Originally Posted by beepbeep View Post
P.S. Be prepared for slight boost taper on high revs if used with mechanical wastegate control. You can straighten up the boost on high revs with ECU-controlled PWD-operated valve but make sure you don't overspeed the shaft by asking it to boost 1 bar at 7000 RPM or such.
Full ECU boost control is planned. Potential for boost taper is fine - worth the risk given the low price of the turbo. I can always upgrade the housing, compressor wheel or the entire turbo later with an Evo IX or Evo X turbo and still have it bolt up.
Old 06-04-2009, 07:03 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #32 (permalink)