View Single Post
EIPtuningR32 EIPtuningR32 is offline
Registered User
EIPtuningR32's Avatar
Join Date: Aug 2008
Location: Gainesville, Fl
Posts: 620
Send a message via AIM to EIPtuningR32
Originally Posted by american-kiwi View Post
Hi EIPtuningR32
i dont think you can buy those lines anymore..if you can...let me know...i got mine made up at a NAPA store...remove the lines..(need to climb under the car for 2 lower ends with 17mm 19 mm..)then carefully cut the crimps off...take the end fitting to a NAPA store (with measured hose length)..ask for high pressure 5/16 fuel line..i tried to use the metric line...but these fitting are a little smaller than the lines by the fuel tank and will slip off the fittings once crimped..(i know, i tried and gas everywhere!)...just get Napa to crimp them with new collars...and your good as new...cost me $5
your a life saver Kiwi. literally.
1982 928S euro M28/11
That criminal under the hood is a really bad influence on me: "hey...what about another 1000 rpm? And you know, we're doing 75...but I can go 100 and you'll hear my beautiful voice a lot better! Lets go baby..."
dammit! I'm such a slut~ N! -Normy
Old 07-15-2009, 08:40 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)