View Single Post
calling911 calling911 is offline
Registered User
 
Join Date: Nov 2006
Location: Charlotte, NC
Posts: 1,515
Quote:
Originally Posted by rootmatt View Post
Sure is possible. Using a pair of valve spring compressors available from our host, you can do valve stem seals and springs/retainers/seats with the heads and cam carriers in place. Easiest if the engine is out on a stand with the exhaust and inlet manifolds removed. That way, if a valve drops in a bit, you can lift it using a finger through the exhaust/inlet port concerned. Otherwise, you can keep the valves up by using compressed air in the cylinder via the spark plug hole or just set the piston to top-dead-centre for the cylinder you are working on. Fiddly job but quite possible. Warn your friends and neighbours to expect the odd cuss.

Matt
WOW! I did not know this!! this is VERY COOL!
__________________
JP

'76 911s Ice Green Metallic bone stock
Old 08-11-2009, 05:35 AM
  Pelican Parts Technical Article Directory    Reply With Quote #3 (permalink)