View Single Post
sjf911 sjf911 is offline
Registered User
 
sjf911's Avatar
 
Join Date: Dec 2006
Location: Idaho
Posts: 5,617
Garage
I have 98mm QCS cylinders from Henry at Supertec with JE 9.5:1 pistons and a stock 3.0 bottom end. I am using 3.2 heads and intake with 964 cams. My methanol injection is the Coolingmist Vari-Cool II with a 1.5 gallon tank in the trunk and a flow sensor. The injector is mounted in between the intercooler and throttle body but significantly closer to the intercooler. The flow controller is mounted in the center console below the AC controls. I am currently running a 0.6 bar spring in my Tial WG but am planning on dropping back to a 0.5 bar spring with a manual boost conroller (Hallman Pro RX). My ambient pressure is 0.92 bar here in the mountains so my real boost peaks at about 1.48 bar.

Coolingmist Water Injection, alcohol injection and Methanol Injection systems
__________________
Steve
Sapere aude
1983 3.4L 911SC turbo. Sold

Last edited by sjf911; 10-14-2009 at 12:21 PM..
Old 10-14-2009, 12:13 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #28 (permalink)