View Single Post
iamchappy iamchappy is offline
Registered User
 
iamchappy's Avatar
 
Join Date: Feb 2003
Location: Minnetonka, MN
Posts: 1,445
Garage
i used a 79 SC 3.0 engine for my build they make great little turbo engines.
I used a 930 cis intake from a 86 euro 930 matched the SC intake ports, Supertec head studs, ARP rod bolts, 930 oil pump, racing valve springs, twin plugged the heads, 91-3.3 turbo pistons and Cylinders, used the SC heads and cams, used the stock SC rods with offset wrist pin modification for stroke. MSD ignition and twinplug distributor made from my SC distributor by Supertec. K-27 7200 turbo. 1030 CFM intercooler and 46 Tial wastegate and Tial BOV.1bar boost. Kennedy stage 2 228mm pressure plate unable to hold the power in 5th gear.

Makes a 3.12 displacement engine similar to the 935 IMSA engines.
Engine spins up freely and very quick, loves to run up the RPM's without running out of breath.
If your not trying to build the biggest badest engine on the planet then your SC engine is a good
place to start from and you can easily make 400hp + out of it.
__________________

914 6 Turbo twinplug 3.12
87 924S
Lexus SC400
Lexus LS400
Old 10-28-2009, 06:16 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)